Maintenance and repair
Some of the common damage to reading glasses can be repaired.
Read on to see some repairs that you may be able to carry out (or teach to the person) if you have the right tools and/or spare parts.
Faydalı alətlər və ehtiyyat hissələri
İlkin texniki qulluq və təmir aşağıdakı alətlər və/və ya ehtiyyat hissələrindən istifadə etməklə yerinə yetirilə bilər:
- Təmin etdiyiniz oxumaq üçün eynəkdəki vintlərə uyğun kiçik ölçülü vintaçanlar
- Böyüdücü (kiçik vintləri görmək üçün)
- Water, detergent and lint free cleaning cloths
- Super glue
- Spare parts for the reading glasses you are providing:
- Screws
- Nose pads
Vidaları sıxın və/və ya əvəz edin
The tiny screws in the hinge of the glasses keep the temples of the reading glasses in place while allowing them to open and close. There are also screws that hold the nose pads in place.
If these screws have loosened tighten them gently with the appropriate sized small screwdriver.
Əgər bir vint itibsə, onda onun yerinə ehtiyat vinti bərkidin.
Qırılmış və ya itmiş burun yastıqları
Əgər sınıbsa, burun yastığını (onu yerində saxlayan vinti açın) çıxarın.
Burun yastığını ehtiyyatla əvəz edin.
Fəaliyyət
- Rəzədə itmiş vintin əvəz edilməsi
- Burun yastıqlarını çıxarmaq və əvəz etmək.
Broken plastic frames
Broken frames can be repaired with tape or super glue.
If using super glue, clean the parts that are to be glued together. You can use sandpaper to make sure that the edges are neat and flat. Apply the glue on both parts and clamp them together for between 20-50 seconds.